Diy Fountain Pen Stand. Stand material is pretty open; For the pen rests i started by cutting a piece of wood double the size i wanted, drilled holes in the middle and cut them in half along the holes.
The drilled holes were not deep enough, so i shaped them further with a dremel. Once you get hooked on fountain pens, there's no turning back. The shallow drawers will be lined with flocked plastic trays for the pens, and the upper section (which is attached) to be for.
Once You Get Hooked On Fountain Pens, There's No Turning Back.
But to make it convenient to write with these pens, it became necessary to make a stand for them. Web re purpose some scrap wood and show off your hand made pens with this diy pen stand. For the pen rests i started by cutting a piece of wood double the size i wanted, drilled holes in the middle and cut them in half along the holes.
Web It’s Taking Up A Lot Of Space On My Desk And Feels Somewhat Unsafe, So I’d Like To Make A Stand To Hold At Least The Ones That I Use Regularly.
So i have two sets of the two pen rests. Stand material is pretty open; Find a high quality photo of the thing you want to make a small model of.
These Were Platinum, Sailor And Pilot Desk Pens.
I have access to a 3d printer, laser cutter, and wood shop. Web the ultimate plan is to have the deep bottom drawers be the place to put the sample vial trays; The shallow drawers will be lined with flocked plastic trays for the pens, and the upper section (which is attached) to be for.
All These Pens Come With Original Caps.
The drilled holes were not deep enough, so i shaped them further with a dremel. The pen holder is a mini or is that giant 555 timer chip. Print it out and break it up into parts that you can build.
To Make This Fountain Pen Holder, Themed For An Electronics Enthusiast, All You Need Is Some Bits Of Wood, Glue, Paint And Some Basic Tools.
